Familiarizing yourself with your appliance en-us
13
4.2 Controls
You can use the control panel to configure all functions of your appli-
ance and to obtain information about the operating status.
ON/OFF button and reset
button
Switching on the appliance
→
Page31
Switching off the appliance
Terminating the wash cycle
→
Page32
Cycle buttons
Cycles →
Page15
Display The display shows information
about the remaining run time or ba-
sic settings. You can change the
basic settings via the display and
the setting buttons.
→
"Changing the basic settings",
Page35
Electronic delay time Setting the electronic delay time
→
Page31
Remote Start
→
"Remote Start ", Page37
Cycle buttons and options
Cycles →
Page15
Options →
Page17
Start button Starting the wash cycle
→
Page31
WLAN display
Home Connect →
Page36
Water supply display Display for water supply
Door handle
1
Open the appliance door.
1
Depending on the appliance specifications