en-us Basic Operation
20
¡ To save energy, the appliance switches off
automatically 10minutes after the end of the wash
cycle. If you open the appliance door immediately after
the wash cycle has ended, the appliance will switch off
after 4 seconds.
12.7 Interrupting the wash cycle
1. Press On/Off.
The program is saved and the appliance switches off.
2. Press On/Off.
3. Press to resume the wash cycle.
12.8 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
▶ Press for approx. 4seconds.
a All displays light up.
a As soon as the displays are off, the residual water is
pumped out.
a The cycle is cancelled and ends after approx. 1minute.
12.9 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
▶ Do not fully open the door until water noises have
stopped and steam has subsided.
1. Please note the information on Preventing Material
Damage →
Page6
.
2. Press On/Off.
To Next Page
Loading...
Need help?
General
