Cleaning and maintenance en-us
25
2. Turn the coarse filter counterclockwise and take out
the filter system .
‒ Ensure that foreign objects do not fall into the sump.
3. Pull the micro filter downward and off.
4. Press the locking catches together and take the
coarse filter upward and out .
5. Clean the filter elements under running water.
Carefully remove the rim of debris between the coarse
filter and the fine filter.
6. Put the filter system back together.
Ensure that the locking catches on the coarse filter click
into position.
7. Insert the filter system into the appliance and turn the
coarse filter clockwise.
‒ Ensure that the arrow markings match up.
15.5 Cleaning the spray arms
Limescale and soiling in the dishwashing water may block
the nozzles and bearings on the spray arms. Clean the
spray arms regularly.
1. Unscrew the upper spray arm and pull down to
remove .
2. Pull up the lower spray arm to remove.
To Next Page
Loading...
Need help?
General
