HomeConnect® en-us
23
To be able to use HomeConnect®, you must first set up
the connection to the WLAN home network (Wi-Fi
1
) and to
the HomeConnect® app.
The HomeConnect® app guides you through the entire
registration process. Follow the instructions in the
HomeConnect® app to implement the settings.
Tips
¡ Consult the HomeConnect® documents supplied.
¡ Follow the instructions in the HomeConnect® app as
well.
Note:Also note the safety information in this instruction
manual and ensure that it is also observed when operating
the appliance using the HomeConnect® app.
14.1 HomeConnect® quick start
Connect your appliance to a mobile device quickly and
easily.
Setting up the HomeConnect® app
1. Install the HomeConnect® app on your mobile device.
2
2. Start the HomeConnect® app and set up access for
HomeConnect®.
The HomeConnect® app guides you through the entire
registration process.
Setting upHomeConnect®
Requirements
¡ The HomeConnect®app is installed on your mobile
device.
¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
¡ The appliance door is closed.
1. Open the HomeConnect® app and scan the following
QR code.
2. Follow the instructions in the HomeConnect® app.
14.2 HomeConnect® settings
Adapt HomeConnect® to your needs.
You can find the HomeConnect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether HomeConnect® has been
set up and whether the appliance is connected to your
home network.
14.3 Remote Start
You can use the HomeConnect® app to start the
appliance with your mobile device.
Note:You can change settings using the HomeConnect®
app.
Activating Remote Start
Requirements
¡ The appliance is connected to your WLAN home
network.
¡ The appliance is connected to the HomeConnect® app.
¡ A program is selected.
▶ Press .
If you open the appliance door, the function is
automatically deactivated.
a button lights up.
Tip:To deactivate the function, press .
Note
The following settings are possible using the
HomeConnect® app:
¡ Deactivate the function permanently.
¡ Select the function using the button. This setting is
the default preset at the factory.
¡ Activate the function permanently. With this setting
pressing button is not necessary.
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
2
Apple App Store und the Apple App Store logo are trademarks of Apple Inc. Google Play and the Google Play logo are
trademarks of Google LLC.