en-us HomeConnect®
40
1. Open the HomeConnect® app and
scan the following QR code.
2. Follow the instructions in the
HomeConnect® app.
15.3 HomeConnect® settings
Adapt HomeConnect® to your needs.
You can find the HomeConnect®
settings in the basic settings for your
appliance. Which settings the display
shows will depend on whether
HomeConnect® has been set up and
whether the appliance is connected to
your home network.
15.4 Remote Start
You can use the HomeConnect® app
to start the appliance with your mobile
device.
Tip:If you select "rc:02" in the Basic
settings →
Page38
of this function, the
function is permanently activated, and
you can start your appliance with a
mobile device at any time.
Activating Remote Start
When you have selected "rc:01" in the
basic settings of this function, activate
the function on your appliance.
Requirements
¡ The appliance is connected to your
WLAN home network.
¡ The appliance is connected to the
HomeConnect® app.
¡ "rc:01" is selected in the Basic set-
tings →
Page38
of this function.
¡ A program is selected.
▶ Press .
If you open the appliance door, the
function is automatically
deactivated.
a button lights up.
Tip:To deactivate the function, press
.
15.5 Remote Diagnostics
The Customer Service can access
your appliance via Remote Diagnostics
if you ask them to do so, if your
appliance is connected to the
HomeConnect® server and if Remote
Diagnostics is available in the country
where you are using the appliance.
Tip:Further information and details
about the availability of Remote
Diagnostics in your country can be
found in the Service/Support section of
your local website: www.home-
connect.com.
15.6 Software update
You can use this function to update the
software of your appliance, e.g. for
optimization, troubleshooting or safety-
relevant updates.
The HomeConnect® app informs you
about available software updates.
To Next Page
