26
• You may use the piece you removed in Step 7 to attach to the inside of
the adjacent cabinet and hang the drain hose from as shown (screws
are not supplied) in place of using a Nonmetallic Tie as pictured in the
next illustrations. Do not exceed 43” in drain hose height.
• The dishwasher drain hose must be installed with a portion of it at
least 33” (84 cm) o the floor; otherwise the dishwasher may not drain
properly.
20
screws
not
provided
Drain Connection
IMPORTANT NOTES about your drain connection:
• If local ordinance require an air gap, install it according to the
manufacturer’s instructions.
• If the dishwasher drain hose is to be connected to a disposer
dishwasher drain connection, remove the plug from the disposer’s
dishwasher drain connection.
• The dishwasher drain hose must have one place along its length that is
securely attached 33″ (84 cm) above the floor.
• The drain hose length can be extended if necessary. Use kit
#SGZ1010UC. The maximum length of the drain hose, including the
hose leading to the air gap, is 150″ (380 cm).
Scan here for video instructions on
the drain connection
To Next Page
Loading...
Need help?
General
