14
Electrical Connection
Avoid Electrical Shock Hazard!
Do not work on an energized circuit. Doing so could result in
serious injury or death. Only qualified electricians should perform
electrical work. Do not attempt any work on the dishwasher
electric supply circuit until you are certain the circuit is de-
energized.
To avoid possible injury or property damage, care should be exer-
cised when the dishwasher is installed or removed to reduce the
likelihood of damage to the power cord.
Avoid Fire Hazard!
Make sure electrical work is properly installed and checked by
qualified electricians.
Make sure there are no loose electrical connections. Make sure
all electrical connections are properly made.
Loose and improperly installed electrical connections can
result in overheating!
To avoid risk of fire, observe the following precautions:
Wall Socket Connections:
Only use the provided power cord for wall socket connections.
DO NOT attach an extension cord or any type of modified cord or
adapter with this appliance.
DO NOT cut or splice the power cord.
DO NOT alter the power cord in any way.
Permanent Wire Connections (in addition to the warnings above):
Only use the junction box power cord, sold as Accessory kit
#SMZPCJB1UC.
Carefully review the terminal block installation instructions.
DO NOT remove, alter or bypass the terminal block.
WARNING
To Next Page
Loading...
Need help?
General
