9
Enclosure Requirements
To Avoid Scalding or Electrical Shock Hazard!
Make sure the water supply and electrical supply are shut o
before installation or service.
To Avoid Electrical Shock/Fire Hazard!
Do not allow the electrical and supply lines to touch.
Note: This dishwasher is designed to be enclosed on the top, back and
both sides by standard residential kitchen cabinetry.
• Select a location as close to the sink as possible for easy access to
water supply and drain lines.
• For proper dishwasher operation and appearance, ensure that the
enclosure is square and has the dimensions shown.
• If the dishwasher is to be installed in a corner, ensure that there is
adequate clearance to open the door as shown.
min 34"
(864 mm)
min 24"
(610 mm)
23
5/8
" - 24
1/4
"
1
2
WARNING
To Next Page
Loading...
Need help?
General
