30
• If your dishwasher comes with a rubber apron, tuck it behind the tab
on the metal brackets as shown.
25
• Slide metal toe panel into position ensuring the bottom of the toe panel
is flush with the floor. Use screw (J) to mount the toe panel through the
hole it matches up with on the metal brackets (K) as shown.
Note: The toe panel height can be adjusted by screwing into a dierent
hole in the bracket.
• Check for correct fit of apron by opening the door. Ensure the apron
does not bind up and can freely move up and down behind the toe
panel. Installation is complete!
26
J
I
To Next Page
Loading...
Need help?
General
