Bosch Singular 5200 - Setting Domestic Hot Water (DHW) Temperature; Viewing Basic Information and Modes

8
|
User Manual
Singular Combi Boiler - BTC 439003302 A (2021/03)
3.3 Setting the DHW (Domestic Hot Water) Temperature
WARNING:
 Water above 120°F (50°C) can cause instant scalding,
severe burns, or death.
To adjust the water temperature:
1. Press the Mode button until the icon turns on.
Figure 6
2. Press the or buttons until the desired temperature appears on the
display.
Figure 7
Temperature range Adjusting the water temperature
82–180°F (Fahrenheit mode)
31–50°C (Celsius mode)
2°F increments
1°C increments (31–45°C) & 46, 48, 50°C
130°F, 140°F
55°C, 60°C
10°F or 5°C increments
Table 5
To change the temperature over 120°F, hold down button for 5
seconds to unlock.
3.4 Viewing Basic Information
To turn the boiler on, press the button.
Figure 8
To view information about the boiler, press the MODE and buttons for 5
seconds.
Figure 9
Press the MODE button to switch between the information types.