EasyManua.ls Logo

Bosch Buderus SSB399 User Manual

Bosch Buderus SSB399
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Bosch Buderus SSB Boiler Control Operations
SSB255 | SSB399 | SSB512
Control Operations Guide
WARNING:
the heating system can cause personal injury and property damage.
Follow these instructions precisely.
If you require assistance or further information, contact a licensed
Question and Answer IconNeed help?

Do you have a question about the Bosch Buderus SSB399 and is the answer not in the manual?

Bosch Buderus SSB399 Specifications

General IconGeneral
Heat Exchanger MaterialStainless Steel
Ignition TypeElectronic Ignition
MountingWall-mounted
TypeCondensing Boiler
Max Flow Temperature194°F (90°C)
Fuel TypeNatural Gas or Propane
Flue OptionsConcentric
Dimensions (H x W x D)900 x 440 x 400 mm

Summary

Bosch Buderus Boiler Control Operations Introduction

General Safety Warnings

Crucial safety instructions for installation, setup, modification, operation, and maintenance to prevent injury or damage.

Symbols and Settings Reference

Key to Symbols and Safety

Explains warning symbols, safety keywords, and important information indicators used throughout the manual.

Boiler Settings Menu

Comprehensive list of all configurable parameters for the SSB boiler, categorized by function for easy reference.

Heating Modes Configuration

Central Heating (CH) Modes Overview

Introduces the six Central Heating (CH) modes and details Mode 0: Setpoint control using dry contacts.

General Operation Settings

Parameter Descriptions for General Operation

Detailed explanations of general operation parameters, including CH mode, pump modes, setpoints, and hysteresis.

Outdoor Reset Curve Settings

Outdoor Reset Curve Parameters

Defines parameters for the outdoor reset curve, specifying supply temperatures based on outdoor air temperature.

Domestic Hot Water Operation

Domestic Hot Water Settings and Operation

Configuration options for domestic hot water production, covering modes, tank settings, priority, and pump overrun.

Cascade Operation Setup

Cascade Operation Settings and Parameters

Settings for enabling and configuring multi-boiler cascade installations, including emergency modes and addressing.

Start-up and Commissioning

Commissioning Settings

Parameters for initial boiler start-up, including frost protection, DHW limits, fan speed, and model/gas type settings.

Cascade Quick Set-Up Guide

Step-by-Step Cascade Configuration

A simplified procedure for configuring multiple boilers in a cascade, covering managing boiler setup and individual boiler addressing.

Related product manuals