EasyManua.ls Logo

Bosch Worcester GREENSTAR CDi Series User Manual

Bosch Worcester GREENSTAR CDi Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GREENSTAR CDi
WALL
HUNG
RSF GAS-FIRED
CONDENSING
COMBINATION BOILER
FOR SEALED CENTRAL HEATING SYSTEMS AND MAINS FED DOMESTIC HOT WATER
THE APPLIANCE
IS
FOR USE WITH
NATURAL GAS OR
L.P.G.
(Cat
II
2H3P TYPE C13 & C33)
NATURAL
GAS:
WORCESTER
GREENSTAR 25CDi
GC
NUMBER 47-311-92
WORCESTER GREENSTAR 30CDi
GC
NUMBER 47-311-93
WORCESTER GREENSTAR 37CDi
GC
NUMBER 47-406-08
WORCESTER GREENSTAR 42CDi
GC
NUMBER 47-406-10
LIQUID PETROLEUM GAS:
WORCESTER GREENSTAR 25CDi
GC
NUMBER 47-311-96
WORCESTER GREENSTAR 30CDi
GC
NUMBER 47-311-97
WORCESTER GREENSTAR 37CDi
GC
NUMBER 47-406- 09
WORCESTER GREENSTAR 42CDi
GC
NUMBER 47-406-11
INSTRUCTION
MANUAL
INSTALLATION,
COMMISSIONING
&SERVICING
(}enchmarf)
Question and Answer IconNeed help?

Do you have a question about the Bosch Worcester GREENSTAR CDi Series and is the answer not in the manual?

Bosch Worcester GREENSTAR CDi Series Specifications

General IconGeneral
Efficiency RatingA
MountingWall-mounted
Maximum Working Pressure3 bar
TypeCombi
Fuel TypeNatural Gas/LPG
Dimensions760 x 440 x 360 mm
WarrantyUp to 10 years
Output Rating30kW
Weight38 kg (depending on model)

Summary

SAFETY & REGULATIONS

SAFETY PRECAUTIONS

Essential safety measures before installation and operation.

INSTALLATION REGULATIONS

Compliance with gas, electrical, and building regulations.

PRE-INSTALLATION

CLEANING PRIMARY SYSTEMS

Flushing and cleaning the heating system before installation.

MAINS SUPPLIES

Requirements for electrical and water supply connections.

INSTALLATION

FITTING THE APPLIANCE / BOILER CONNECTIONS

Hanging the boiler and making gas/water connections.

FLUE INSTALLATION

Measuring and fitting the flue system components.

ELECTRICAL

Wiring instructions and safety precautions for electrical connections.

COMMISSIONING

STARTING THE APPLIANCE

Safe procedures for switching on and starting the boiler.

COMMISSIONING

Final checks, gas pressure, and control settings.

SERVICING & SPARES

SETTING THE GAS/AIR RATIO

Procedure for adjusting the gas/air ratio for optimal combustion.

FAULT FINDING & DIAGNOSIS

FAULT FINDING

Troubleshooting guide for error codes and common issues.

Related product manuals