Bosch Worcester GREENSTAR CDi Series - Unpacking the Appliance

UNPACKING THE APPLIANCE
as handle
\
~
[;)
UNPACKING THE APPLIANCE
UNPACKING THE APPLIANCE
A - Outer carton
B -
Packaging base
C - Protective wrapping
D -
Appliance outer case
E- Screws
F- Clip
G - Protective packaging
~ t With the wall frame and ancillary items
removed (see p.21),
lay the carton (A) on its
back.
~ 2. Open the carton bottom flaps and fold
under boiler. Do not remove the packaging
base.
~ 3. Stand carton (A) with boiler upright on
the packaging base (B).
~ 4. Remove outer carton (A) and place safely
away from the working area.
~ 5. Remove the protective wrapping (C)
~ 6. Lie the boiler on its back.
~ 7. Remove the packaging base (B) and
place safely away from the working area.
REMOVING OUTER CASE
~ 8. Loosen but do not remove the 2 screws
(E) securing boiler casing at the bottom of
the appliance.
~ 9. Pull upwards to release the clip (F) on top
of the boiler and pull the case upwards.
~ 10. Remove the outer case.
~ 11. Remove the protective packaging (G)
from the electrode assembly.
I
I
I
I
I
I
9
-------------
--
/
/
I
I
I
I
I
I
I
I
I
INSTALLATION & SERVICING INSTRUCTIONS
FOR WORCESTER BOSCH GREENSTAR 25CDI/30CDI/37CDI/42 co; ~ORCESTER
6 720 613 700a (2006/11)
Bosch Group