NL Transport, storage and disposal
Cleaning the drain pump
Large food particles or objects can
block the drain pump. As soon as the
washing water is no longer draining
properly, you must clean the drain
pump.
2
1
WARNING
Risk of injury!
Sharp and pointed objects such as
shards of glass can block the drain
pump and cause injuries.
▶ Foreign objects careful
remove.
a The pump cover clicks audibly
fixed.
9. Assemble the screening system.
10. Install the lower and upper
basket.
1. Unplug the appliance from the
mains.
2. Remove the upper and lower
crockery basket.
t ttransport, storage and disposal transport, store
3. Remove the strainer system.
4. Scoop out the existing water.
and drain
Here you will find an explanation of
how to prepare the device for
transport and storage. We also
explain how to dispose of old
devices.
If necessary, use a sponge for
this.
5. Lift up the pump cover with a spoon
and grasp it by the bracket.
Disassemble device
1. Unplug the appliance from the
mains.
2. Turn off the tap.
3. Disconnect the waste water
connection.
4. Disconnect the drinking water
connection.
5. If present, loosen the fastening
screws of the furniture parts.
6. Lift the pump cover diagonally
inwards and remove it.
6. If present, remove the plinth.
7. Remove food residues and foreign
objects from the pump impeller.
7. Carefully pull the device forward,
pulling the hose along with it.
8. Fit the pump cover and press
down .
56
To Next Page
Loading...
Need help?
General
