Bosch SMS2ITW08G - 5.2.1 Symbols on the display

en Familiarising yourself with your appliance
16
10
Programme buttons and addi-
tional functions
Programmes
→"Programmes", Page17
Additional functions
→"Additional functions", Page19
11
Remote Start
→"Remote Start ", Page37
12
Timer programming
1
Setting timer programming
→Page32
13
Programme sequence display The programme sequence display
shows the current cycle of the appli-
ance, e.g. washing, rinsing or drying.
14
Door handle
1
Open the appliance door.
1
Depending on the appliance specifications
Symbols on the display
1
The display shows the following sym-
bols depending on the model. See
here for an explanation.
Symbol Description
If the symbol for ma-
chine care lights up on
the display, run machine
care.
→"Machine Care ",
Page38
If the rinse aid refill indic-
ator lights up on the dis-
play, top up with rinse
aid.
→"Adding rinse aid",
Page25
If the special salt refill in-
dicator lights up on the
display, add special salt
to the dispenser for spe-
cial salt just before the
programme starts.
→"Adding special salt",
Page24
Symbol Description
If the appliance is con-
nected to a wireless
WLAN home network,
the symbol lights up on
the display.
→"HomeConnect ",
Page36
If you have activated the
electronic start timer, the
relevant symbol lights up
on the display.
→"Setting timer pro-
gramming", Page32
If the water inflow or
drainage malfunctions,
the symbol lights up or
flashes on the display.
→"Troubleshooting",
Page42
1
Depending on the appliance specifications