en Before using for the first time
22
Inserting baking sheet spray head
Use the baking sheet spray head in-
stead of the top basket to clean large
trays, grilles and plates.
1. Remove top basket.
2. Insert the baking sheet spray head
in the holder and turn to the
right .
a The baking sheet spray head
clicks into position.
Removing baking sheet spray
head
If you no longer require the baking
sheet spray head, remove it from the
appliance.
1. Turn the baking sheet spray head
anticlockwise and remove from the
holder.
2. Insert the top basket in the appli-
ance.
Before using for the first time
9 Before using for the
first time
Before using for the first time
9.1 Performing the initial con-
figuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
HomeConnect app.
Requirement:The appliance has
been installed and connected.
→Page11
1.
Add special salt. →Page24
2.
Add rinse aid. →Page25
3. Switch on the appliance.
→Page31
4. Setting the water softening system.
→Page23
5. Set the amount of rinse aid to be
dispensed. →Page26
6.
Add detergent →Page27.
7. Start the Programme with the
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip:You can change these settings
and other Basic settings →Page34
at any time.