EasyManua.ls Logo

Bosch SMS40T42UK User Manual

Bosch SMS40T42UK
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
%JTIXBTIFS
FO0QFSBUJOHJOTUSVDUJPOT

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Bosch SMS40T42UK and is the answer not in the manual?

Bosch SMS40T42UK Specifications

General IconGeneral
Door colorWhite
Control typeButtons, Rotary
Built-in displayNo
Appliance placementFreestanding
Cutlery compartment typeBasket
Upper basket adjustable heightYes
Cycle time195 min
Noise level50 dB
Delayed start timer-
Dishwashing programsEco, Normal, Pre-rinse, Quick
Number of place settings12 place settings
Number of washing programs4
Number of temperature settings3
Drying classA
Annual water consumption3300 L
Annual energy consumption290 kWh
Power consumption (off)0.1 W
Water consumption per cycle11.8 L
Energy consumption per cycle1.02 kWh
Weight and Dimensions IconWeight and Dimensions
Width600 mm
Height845 mm

Summary

Intended use

Safety instructions

Before you switch ON the appliance

Delivery

Installation

In daily use

Childproof lock (door lock)

Damage

Disposal

Protection of the environment

Packaging

All plastic parts of the appliance are identified with internationally standardised abbreviations.

Old appliances

This appliance is identified according to the European guideline 2002/96/EC on waste electrical and electronic equipment – WEEE.

Getting to know your appliance

Control panel

List of controls on the dishwasher's front panel, including ON/OFF switch, door opener, and programme selector.

Appliance interior

Identifies key components within the dishwasher, such as baskets, spray arms, and dispensers.

Water softening system/ Special salt

Setting

The amount of salt dispensed can be set in 4 stages depending on the hardness of your water.

Water hardness table

Table showing water hardness levels (Clarke, mmol/l) and corresponding settings for the water softening system.

Using special salt

Switching off salt refill indicator/water softening system

Using detergents with salt component

Rinse aid

Setting amount of rinse aid

Switching off rinse-aid refill indicator

Utensils

Not suitable

Lists items like wooden cutlery, decorative glasses, and plastic parts not resistant to heat.

Glass and utensil damage

Discusses causes of glass and utensil damage, such as glass type, detergent, and water temperature.

Loading the dishwasher

Unloading the dishwasher

Cups and glasses

Pans

Cutlery basket

Etagere

Folding spikes

Small accessories holder

Knife shelf

Adjusting the height of the basket

Top basket with side levers

Step-by-step guide on how to adjust the top basket height using side levers.

Top basket with upper and lower roller pairs

Instructions for adjusting the top basket height using roller pairs.

Detergent

Adding detergent

Step-by-step instructions on how to open the detergent dispenser and add detergent.

Combination detergent

Overview of programmes

Intensive 70°, Normal 65°, Eco 50°

Details programmes for pots, pans, mixed utensils, and eco-friendly cleaning.

Gentle 40°

Programme for sensitive utensils, cutlery, and temperature-sensitive plastic.

Quick 45°

Programme for all types of utensils with cold rinsing and intermediate cleaning.

Programme selection

Information for test institutes

Additional options

Express Wash/ Speed Perfect (VarioSpeed)

Reduces running time by 20-50% by increasing water and energy consumption.

Intensive zone

Intensifies spray pressure and rinsing temperature in the lower basket for heavily soiled items.

Hygiene

Increases cleaning temperature for enhanced hygiene status, ideal for chopping boards and baby bottles.

Half load

Saves water, energy, and time when washing only a few items.

Extra drying

Increases final rinse temperature and drying phase for better drying of plastic parts.

Operating the appliance

Programme data

Details consumption values for programmes, influenced by conditions and water hardness settings.

Aqua sensor

Measures water turbidity to optimize rinsing and reduce water consumption.

Switching on the appliance

Step-by-step guide to turning on the dishwasher and starting a programme.

Timer programming

Allows delaying the start of a programme by 3, 6, or 9 hours.

End of programme

Interrupting the programme

Terminating the programme (Reset)

Changing the programme

Intensive drying

Cleaning and maintenance

Overall condition of the machine

Checking spray arms, detergent dispenser, door seal, and general cleanliness.

Special salt and rinse aid

Checking refill indicators and refilling salt and rinse aid as required.

Filters

Spray arms

Fault, what to do?

Waste water pump

Troubleshooting steps for blockages in the waste water pump, including filter removal and cleaning.

Fault table

Check water supply indicator

Troubleshooting steps when the 'Check water supply' indicator lights up, related to hose kinks or blockages.

Check water supply display flashing

Actions to take when the 'Check water supply' display flashes, indicating a technical fault.

Displays flash

Troubleshooting steps when multiple displays flash, often related to the door closure or technical faults.

Fault table

Refill indicators and Water Level Issues

Troubleshooting lit refill indicators and water remaining at programme end.

Utensil Drying Problems

Addressing issues with dry utensils, including plastic and cutlery.

Fault table

Interior Wetness, Food Remnants, and Filter Issues

Troubleshooting wet interiors, food residue, and filter blockages.

Programme Weakness and Placement Issues

Addressing weak programmes, inadequate rinsing, and basket height problems.

Fault table

Detergent residue

Troubleshooting detergent residue due to dispenser blockage or incorrect tablet usage.

Water stains on plastic parts

Addresses water stains on plastic, suggesting programme adjustments and rinse aid.

Coatings on Container or Door

Solutions for coatings on the container or door, including changing detergent and checking water softening.

Fault table

Limescale and Stubborn Coatings

Troubleshooting limescale and difficult-to-remove coatings on utensils and appliance interior.

Residues and Discolouration

Addressing tea/lipstick stains, coloured coatings, and plastic discolouration.

Fault table

Streaks, Clouding, and Rust Spots

Resolving streaks on glasses, glass clouding, and rust spots on cutlery.

Appliance Not Starting or Starting Automatically

Troubleshooting appliance start issues and programmes starting unexpectedly.

Fault table

Setting and Door Issues

Troubleshooting problems with appliance settings, door opening, and closing.

Dispenser and Programme Interruption Problems

Resolving dispenser issues, programme interruptions, and noise problems.

Foam Formation and Other Noises

Addressing unusual foam formation and knocking/rattling noises.

Customer service

Installation and connection

Checking appliance on delivery

Steps for verifying the appliance upon delivery, before installation.

Installing the appliance

General steps for installing the dishwasher correctly.

Waste water connection

Instructions for connecting the waste water hose.

Fresh water connection

Instructions for connecting the fresh water supply hose.

Electrical connection

Guidelines for safely connecting the dishwasher to the electrical supply.

Product package

Safety instructions

Delivery

Technical specifications

Installation

Waste-water connection

Fresh water connection

Electrical connection

Removing the appliance

Transportation

Protection against frost

Childproof lock (door lock)

Baking sheet spray head

AquaStop guarantee

Repair order and advice on faults.

Related product manuals