NLSoftening System
4. "Set water softening."
→
Page 24
Tip:You can change these settings
and other "basic settings" →
Page 35
change at any time.
5. "Set the amount of rinse aid." →
Page 27
6.The "filling detergent"
→
Page 28
†
OSoftening System
hardening system
7.Start the program with the highest
cleaning temperature without
crockery.
Ohuh
hardening system
Hard, calcareous water leaves
limescale residues on the dishes and
the rinse aid container and can clog
parts of the appliance. For good
washing results, you can soften water
with the water softener and softening
salt. To avoid damage to the device,
water with a hardness of more than 7
°dH must be softened.
We recommend that you use the
appliance without any crockery
before using it for the first time due
to possible water stains and other
residues.
Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values.
You can request the water hardness from your local water company or determine it
with a water hardness tester.
Water hardness °dH
0 - 6
7 - 8
9 - 10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
Hardness Range
soft
soft
average
average
average
hard
hard
hard
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
Set value
H00
H01
H02
H03
H04
H05
H06
H07
Remark:Set the device to the
determined water hardness.
→
†Set water softening", page
24
With a water hardness of 0 - 6 °dH
you do not need to use softening salt
for dishwashers and you can switch
off the water softening.
→
†Switching off water softening",
page 25
Set water softening
Set the device to the water hardness.
1.Determine the water hardness and the
desired setting value.
→
†Overview of the water
hardness settings", page 24
2.Press.
24
To Next Page
Loading...
