TroubleshootingNL
Malfunction
E:90-01 lights up alternately.
Cause
Mains voltage is too low.
Troubleshooting
There is no error in the device.
1.Contact an electrician.
2.Have the mains voltage and electrical
installation checked by the
electrician.
E:92-40 lights up alternately. Strainers are dirty or clogged. ▶ Clean the sieves.
"Cleaning sieves", Page 42
Another error code
appears in the indicator
window.
There is a technical
malfunction.
1. Press .
2.Unplug the appliance from
the mains or switch off the
fuse.
E:01-00 to E:90-10
3.Wait at least 2 minutes.
4.Plug the appliance into a
mains socket or switch on
the fuse.
5.Turn on the device.
6.If the problem occurs
again:
† Press .
† Close the tap.
† Remove the plug from the
socket.
† Contact the "service
department"
→Page 61and state the
error code.
Washing result
Malfunction
Crockery is not dry.
Cause Troubleshooting
No rinse aid has been
used or the dosage is
set too low.
1. Fill the "rinse agent"
→ Page 26Bee.
2.Set the amount of rinse aid.
"Setting the rinse aid
amount", Page 27
The program or program option
has no drying phase or a drying
phase that is too short.
▶ †Select a program with drying, e.g.
Intensive, Strong or ECO
programme."→ Page 18
47
To Next Page
Loading...
