NLCleaning and maintenance
Sieving System
3.Pull the microsieve downwards.
The sieve system filters coarse
contaminants from the flushing circuit.
3
2
1
4.Press the locking pieces together
and remove the coarse sieve
upwards .
1
microsieve
fine sieve
coarse sieve
2
2
3
1
Cleaning sieves
Contaminants from the wash water
can clog the sieves.
1.Check the sieves for food residues
after each wash.
2.Turn the coarse sieve
counterclockwise
take
5.Clean the sieve elements under
running water.
and the sieve system out
†
Carefully clean the dirt edge between
the coarse and fine sieve.
† Make sure that no foreign objects
fall into the pump reservoir.
6.Assemble the screening system.
Check that the coarse sieve locking
cams are engaged.
2
1
42
To Next Page
Loading...
