deuse
5.Hang the Extra Clean Zone in the
upper basket and lock it into
place.
Requirement:The device is set up and
connected. →
page 12
1.Pour in special salt. →
Page 29
2.Fill in rinse aid. →
page 31
3.Turn on a device. →
Page 37
4.Set the softening system.
→
Page 29
5.Adjust the amount of rinse aid added.
→
page 31
6.Fill in the cleaner
→
Page 32
.
7.Start the program with the highest
cleaning temperature without
dishes.
Make sure the hooks are in the
correct position. aThe Extra Clean
Zone clicks audibly
a .
We recommend operating the
device without dishes before first
use due to possible water stains and
other residues.
6.Insert the upper dish rack.
Tip:These settings and other basic
settings →
page 40
you can change it
again at any time.
G9 Before the first
use
use
use
10 softening system
9.1 Carry out initial
commissioning
Hard, calcareous water leaves
limescale residue on the dishes and
the washing container and can clog
parts of the appliance.
To get good washing results, you can
soften water using the softening
system and special salt. To avoid
damage to the device, water with a
hardness above 7 °dH must be
softened.
When using the device for the first
time or after restoring the factory
settings, you must make settings.
Tip:Connect your device to a mobile
device. You can easily adjust all
settings using the Home Connect
app.
10.1 Overview of the water hardness settings
Here you will find an overview of the adjustable values for the water hardness
degrees.
The water hardness level
a water hardener
You can ask the local waterworks or determine with ter.
28
To Next Page
Loading...
