deBasic settings
15 basic settings
You can adjust the basic settings of your device to suit your needs.
15.1 Overview of the basic settings
The basic settings depend on the features of your device.
basic
position
Display text
H:041
Selection
H:00 - H:07
Description
Water hardness Adjust the softening system
to the water hardness.
→
"Setting the softening
system", page 29
The level H:00 switches off
the softening system.
Rinse aid addition r:051 r:00 - r:06 Adjust the amount of rinse aid
added.
Switch off the rinse aid
system at level r:00.
Sensor setting SE:001 SE:00 - SE:02 Set the water sensor for dirt
detection.
→
"Sensors", page 11
Dry separately d:001 d:00 - d:01 During final rinsing, the
temperature is increased and
thus an improved drying
result is achieved. The
running time may increase
slightly.
A notice:Not suitable for
delicate dishes.
Switch extra drying on
“d:01” or off “d:00”.
1Factory setting (may vary depending on device type)
40
To Next Page
Loading...
