Basic settingsde
basic
position
Display text
A:001
Selection
A:00 - A:01
Description
Hot water Set cold water connection
or hot water connection. Set
the device only for hot
water,
if the hot water is processed
economically and a suitable
installation is available, e.g. B.
a solar system with a
circulation line. The water
temperature should be a
minimum of 40°C and a
maximum of 60°C.
Turn on hot water
"A:01" or switch off
"A:00".
Starter program SP:011 SP:00 - SP:01 Set a predefined program
when switching on the device.
¡When hiring
"SP:00" is the last selected
program when the device
is switched on.
set.
¡When hiring
"SP:01" is preset to the Eco
50° program when the
appliance is switched on.
Signal volume SL:021 SL:00 -SL:03 Control the signal volume.
The level "SL:00" switches off
the beep.
If the Eco drying function is
activated, the program does
not end
acoustically indicated by a
signal tone.
Key volume bL:021 bL:00 - bL:03 Adjust the key volume
during operation. The level
"bL:00" switches off the key
tones.
1Factory setting (may vary depending on device type)
41
To Next Page
Loading...
