Bosch SMS6HCB01A - Setting Additional Functions; Timer Programming; Starting the Wash Programme; Activating Button Lock

operation aus
35
14.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
▶ Press the button for the relevant
additional function.
→"Additional functions", Page22
a The additional function is set and
the additional function button
flashes.
14.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press ⁠ or ⁠ ⁠.
a "00h:01m" appears on the display.
2. Use ⁠ or ⁠ to set the re-
quired start time for the pro-
gramme.
3. Press ⁠.
a This activates time preselection.
Tip:To deactivate timer program-
ming, press ⁠ or ⁠ repeatedly
until "00h:00m" appears in the dis-
play.
14.6 Starting the programme
▶ Press .
a The programme has ended when
the display shows "00h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page36
¡ The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Tip:To assist the drying, we recom-
mend that the door will be partially
opened after the cycle.
14.7 Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
▶ Press for approx. 3seconds.
a The button lock is activated and
will be automatically deactivated at
the end of the programme.
a The display shows "CL" when the
appliance is running.
a The button lock remains activated
with a power failure.
14.8 Deactivate button lock
▶ Press for approx. 3seconds.
14.9 Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press ⁠.
a The programme is saved and the
appliance switches off.