Bosch SMS6HCB01A - Changing Basic Settings; Home Connect Integration

HomeConnect aus
39
Basic setting Display text Selection Description
Remote Start rc:01 rc:00 - rc:02 Activate or deactivate
→"Remote Start ",
Page40.
The following settings are
possible:
¡ With the setting "rc:00",
the function is perman-
ently deactivated.
¡ With the setting "rc:01",
the function can be selec-
ted via the button.
→"Activating Remote
Start ", Page41
¡ With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the HomeConnect app.
→"HomeConnect ",
Page39
Factory setting rE: Start with
Y:ES
Confirm with
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
15.2 Changing basic settings
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
a The display shows ⁠.
3. Press repeatedly until
the display shows the required set-
ting.
4. Press or repeatedly until the
display shows the right value.
You can change several settings.
5. To save the settings, press
for 3 seconds.
HomeConnect
16 HomeConnect
HomeConnect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
HomeConnect app.
The HomeConnect services are not
available in every country. The avail-
ability of the HomeConnect function
depends on the availability of
HomeConnect services in your coun-
try. You can find information about
this at: www.home-connect.com.