EasyManua.ls Logo

Bosch SMV46KX04E - Switching on the Appliance; Setting a Programme; Setting Additional Functions; Setting Timer Programming

Bosch SMV46KX04E
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic operation en
39
15.2 Switching on the appli-
ance
Press ⁠.
The Eco 50° programme is set by
default.
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
If you do not perform any actions
on the appliance for 15 minutes,
the appliance will automatically
switch off.
15.3 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the right programme button.
→"Programmes", Page19
a The programme is set and the pro-
gramme button flashes.
15.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
→"Programmes", Page19
Press the button for the relevant
additional function.
→"Additional functions", Page21
a The additional function is set and
the additional function button
flashes.
15.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press ⁠.
a "h:01" appears in the display.
2. Use or to set the required
start time for the programme.
3. Press ⁠.
a This activates timer programming.
Tip:To deactivate timer program-
ming, press or repeatedly until
"h:00" appears in the display.
15.6 Starting the programme
Press .
a The programme has ended when
the display shows "0:00".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page40
¡ The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
15.7 Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This

Table of Contents

Related product manuals