en Basic operation
40
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Open the appliance door carefully.
2. Press .
a The programme is saved and the
appliance switches off.
3. Press to resume the pro-
gramme.
4. Close the appliance door.
15.8 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
1. Open the appliance door.
2. Press for approx.
3seconds.
3. Close the appliance door.
a The programme is cancelled and
ends after approx. 1minute.
15.9 Switching off appliance
1. Please note the information on
Safe use →Page10.
2. Press .
3. To prevent damage from dripping
water, turn the water tap off tight
(not applicable to appliances with
Aqua-Stop).
Tip:If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.