en Basic settings
42
Basic setting Display text Selection Description
TimeLight S:01
1
S:00 - S:02 Switch TimeLight on or off.
While the programme is run-
ning, status information is
projected onto the floor be-
low the appliance door relat-
ing to timer programming,
the programme or the time
remaining. If the base panel
is pulled forwards or if the
appliance is installed at eye
level with the cabinet front
fitted flush, the display is not
visible.
Level "S:00" switches Time-
Light off.
InfoLight I:01
1
I:00 - I:01 Switch InfoLight on or off.
While the programme is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This light
will not be visible if the appli-
ance is installed at eye level
with the cabinet front fitted
flush. If the appliance door is
not completely closed, the
spot of light will flash. The
programme has ended when
the spot of light is no longer
visible on the floor.
Level "I:00" switches In-
foLightoff.
Tone volume b:02
1
b:00 - b:03 Adjustment of tone volume.
End of programme indicated
by an audible signal tone.
Level "b:00" switches the
signal tone off.
1
Factory setting (may vary according to model)
16.2 Changing basic settings
1. Open the appliance door.
2. Press .
3. Hold programme button A and
press repeatedly until the dis-
play shows H:xx.
4. Release programme button A and
.
a Programme button A flashes and
the display shows H:04.
5. Press programme button A re-
peatedly until the display shows
the required setting.