Bosch SMV50C00 - Installation Details and Specifications; Product Package and Safety Instructions; Technical Specifications

Installation and connection en
35
Product package
If you have any complaints, contact
the dealer where you purchased
the appliance or our customer service.
ヽ Dishwasher
ヽ Instructions for use
ヽ Installation instructions
ヽ Warranty*
ヽ Installation materials
ヽ Steam guard plate*
ヽ Rubber apron*
ヽ Power cord
* depending on model
Safety instructions
Please follow the safety instructions
under “Installation”.
Delivery
Your dishwasher has been checked
thoroughly in the factory to ensure that it
is in working order. This may cause
small water stains. These will disappear
after the first wash cycle.
Technical specifications
Weight:
max. 60 kg
Voltage:
220–240 V, 50 Hz or 60 Hz
Connected load:
2.0–2.4 kW
Fuse:
10/16 A (UK 13A)
Power input:
switched off 0.10 W
not switched off 0.10 W
Water pressure:
at least 0.05 MPa (0.5 bar), maximum
1 MPa (10 bar). At a higher water
pressure: connect pressure-reducing
valve ahead.
Inlet rate:
minimum 10 litres/minute
Water temperature:
Preferably cold water; if hot water,
depending on type of water inlet hose,
max. temp. 60 °C (see Drinking water
connection).
Capacity:
12–15 place settings
(depending on model).