Bosch SPE53C55UC - Page 44

en-us Troubleshooting
44
Issue Cause and troubleshooting
Excessive formation
of foam occurs.
Rinse aid has been spilled.
▶ Remove the rinse aid with a cloth.
Detergent or machine care product used causes
excessive foaming.
▶ Change the brand of detergent.
Connection to home
network is not es-
tablished.
WLAN on router is not active.
▶ Check the wireless network connection of your
router.
WLAN display is
flashing.
Connection to home network is not available.
▶ Activate the wireless network connection on
your router.
Home Connect can-
not be implemented
correctly.
Home Connect set incorrectly.
▶ Please consult the documents supplied for
HomeConnect®.
There is a technical error.
▶ Please consult the information on support in
the documents supplied for HomeConnect®.
Refill indicator for
rinse aid lights up.
No rinse aid.
1.
Add Rinse aid → Page19 .
2. Set the amount of rinse aid to be dispensed.
→ "Setting the amount of rinse aid", Page20
Refill indicator for
rinse aid does not
light up.
Rinse aid system is switched off.
▶ Set the amount of rinse aid.
→ "Setting the amount of rinse aid", Page20
Display flashes. Appliance door is not closed properly.
▶ Close the appliance door.
‒ Arrange the dishware so that no parts
project beyond the rack and prevent the ap-
pliance door from closing properly.