English | 23
Commissioning
– Note –
Without the QR code spexor cannot be reinstalled later.
Always keep the QR code together with the Quick Start
Guide for safekeeping. Don‘t throw it away; you will need the
QR code if you want to set up spexor again or transfer it to a
new owner later.
▷ You can also reproduce the QR code in the app.
▷ Activate Bluetooth® and set up the WLAN access.
When the blue LED lights up and two short beeps are heard,
this means that your smartphone and the app are connect
-
ed to your spexor via Bluetooth®.
▷ For the first time set-up, you need to input a 4-digit device
code (PIN). The PIN enables you to deactivate the alarm
from spexor – even without a smartphone.
To Next Page
Loading...
