English | 25
Commissioning
An acoustic signal confirms the switch-on. After switching
on, the LEDs light up white briefly. While spexor boots up,
they light up green six times.
Charging the battery
During the charging process the ambient temperature
should be between 0 °C and +40 °C.
▷ Only use the supplied charger to charge the battery of the
alarm device. Otherwise you will void the warranty.
▷ Use the USB cable to connect the Micro-USB port of
spexor to the power supply unit.
▷ Connect the power supply unit to the mains power.
To Next Page
Loading...
