English | 43
Alarm functions
Deactivating alarm
▷ To deactivate the alarm in the app.
The red LEDs go out and the acoustic alarm is silenced.
▷ Alternatively, you can deactivate the alarm on the device
by entering your device PIN using the buttons on the
bottom of the device.
Two short signal tones confirm the correct entry of the de
-
vice PIN. If you enter the wrong device PIN, two short, falling
signal tones will sound.
spexor will also deactivate both monitoring as well as the
alarm if you have deactivated the alarm yourself or notified the
emergency call center. If you want the alarm device to continue
to monitor for you, then you must reactivate the monitoring.
▷ You can change the device PIN in the app via Bluetooth® if
you are near spexor.
To Next Page
Loading...
