English | 47
Updating
Device update
The status and version of the device software can be found
in the app. Important: For an update spexor needs WLAN.
▷ To deactivate the monitoring; see “Deactivating monitor
-
ing” on page 38.
▷ Use the USB cable to connect spexor's Micro-USB port to
the power supply unit. Then plug the power supply unit
into the mains power.
▷ Follow the instructions in the app.
▷ While the update is running, you can continue to use your
phone as normal.
▷ In the app you can also track ongoing updates, this can
take a few minutes.
To Next Page
Loading...
