Bosch SPS6ZMI35E - Changing Basic Settings; Home Connect

en Basic settings
38
Basic setting Display text Selection Description
Wi-Fi Cn:00 Cn:00 - Cn:01 Switch the wireless network
connection on or off.
Level "Cn:00" switches the
wireless network connection
off.
The basic setting "Wi-Fi" is
only available once the ap-
pliance is connected to the
HomeConnect app.
→"HomeConnect ",
Page39
Remote Start rc:01 rc:00 - rc:02 Activate or deactivate
→"Remote Start ",
Page40.
The following settings are
possible:
¡ With the setting "rc:00",
the function is perman-
ently deactivated.
¡ With the setting "rc:01",
the function can be selec-
ted via the button.
→"Activating Remote
Start ", Page40
¡ With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the HomeConnect app.
→"HomeConnect ",
Page39
Factory setting rE: Start with
Y:ES
Confirm with
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
15.2 Changing basic settings
1. Press ⁠.
2. To open the basic settings, press
for 3 seconds.
a The display shows H:xx.
a The display shows ⁠.
3. Press repeatedly until
the display shows the required set-
ting.
4. Press or repeatedly until the
display shows the right value.