Bosch TCC78K751 - Setting up the Appliance

English | 41
Bosch TCC78K751 | 01/2014
Setting up the appliance
1. Deploy the appliance (see
“Deployment system”).
2. Remove the water tank (14) by pulling
it upward, rinse and fill it with fresh
cold water. Do not fill above the “max”
mark.
14
17
3. Replace the water tank and push it
firmly downward into place.
Fill the water tank with fresh
water every day. The tank should
always contain sufficient water
for operat-ing the appliance.
4. Fill the bean container (17) with coffee
beans (for preparation using pre-
ground coffee, see page 44).
5. Push the appliance back into the built-
in unit.
6. Press the power switch (2).
2
7. The appliance now heats up and rinses.
Some water will run out of the coffee
outlet. The language selection is shown
in the display:
8. Press the retracted rotary knob (5)
and turn it to select the language in
which you want the display texts to
appear. The following languages can be
selected:
Deutsch Português
English Dansk
Pycckий Norsk
Nederlands Suomi
Français Česky
Italiano Türkçe
Svenska Magyar
Español EλληvІkά
Polski Бългapckи
9. Press
o
start/stop (10). The language
you selected is saved.
You can change the language setting at
any time (see “Displaying settings”).
10. The company logo and various symbols
will first light up in the display,
followed by the drinks selection menu.
11. Set the water hardness
(see “Displaying settings”).