To Next PageTo Next Page
Need help?Do you have a question about the Bosch TF250 and is the answer not in the manual?
General| Weight | 17.6 lbs |
|---|---|
| Thermostat | Electronic |
| Capacity | Tankless (on-demand) |
| Material | Copper Heating Element |
| Safety Features | Overheating protection |
Details the different Bosch continuous flow hot water system ranges available.
Provides technical data for Highflow, HydroPower, and Pilot gas hot water systems.
Focuses on the benefits and features of the 32 Series for commercial applications.
Describes pre-assembled commercial hot water systems designed for large volumes.
Explains how to link multiple Bosch 32 units for increased capacity.
Lists flueing accessories for internal installations of commercial gas water heaters.
Recommends water heater models based on bathrooms and climate.
Provides essential tips for installing Bosch gas hot water systems according to regulations.
Details required minimum clearances for flue terminals for different system types.
Specifies suitable and prohibited locations for internal continuous flow water heaters.
Describes available standard and premium temperature controllers for the Highflow range.
Explains temperature control options for the 32 Series, including circulation mode.
Addresses common user queries on compatibility, servicing, temperature, and installation.
Provides contact details for Bosch Thermotechnology in Australia.
Provides contact details for Bosch Thermotechnology in New Zealand.
Section for users to record their Bosch sales representative and contact details.
