Bosch HydroPower TF325-8G(13H) User Manual

Installation Manual and Operating Instructions
Continuous Flow Gas Water Heaters (External Models)
HydroPower
TF250-8G(10H)/ TF325-8G(13H)/ TF400-8G(16H)
8 716 473 071 (2015/04) AU
Read installation manual prior to installation of this unit!
Read user manual before putting this unit in operation!
Observe the warnings in the manuals!
The installation room must fulfill the ventilation requirements!
Installation by an authorised person only!

Bosch HydroPower TF325-8G(13H) Specifications

General

Flow Rate	8 L/min
Protection Class	IPX4
Weight	11 kg
Maximum Water Temperature	60 °C
Type	Tankless Water Heater
Gas Type	Natural Gas
Power Supply	None (Hydro-powered)
Water Pressure	0.15-10 bar
Ignition	HydroPower (Water Turbine)

Summary

Safety Information and Symbols

Key to Symbols and Warning Keywords

Critical Safety Information

Provides essential safety advice for gas handling, maintenance, operation, and installation personnel.

Technical Characteristics and Dimensions

Installation

Safety Warnings and Precautions

Crucial safety warnings for installation, including explosion risks and appliance malfunction.

Important Installation Guidance

Essential guidance on location, mounting, water pressure, and valve installation.

Installation Location Requirements

Specifies necessary clearances and conditions for the installation site according to standards.

Hot Water Unit Mounting

Water and Gas Connections

Commissioning

Pre-Startup Checks and Cover Removal

Pressure Adjustments

Operating Instructions

Consumer Gas and Temperature Adjustments

Maintenance

Service Schedule and Procedures

Stresses biennial servicing importance and using authorized technicians/parts.

Troubleshooting

Problem/Cause/Solution Chart

Provides solutions for common issues like fluctuating temperature or unit not working.

Warranty Details

Voluntary Warranty Coverage