To Next PageTo Next Page
Need help?Do you have a question about the Bosch Therm 6000 S and is the answer not in the manual?
General| Fuel Type | Natural Gas or Propane |
|---|---|
| Water Connection | 3/4" NPT |
| Power | 120 W |
| Frequency | 60 Hz |
| Max BTU Input | 199, 000 BTU/hr |
| Voltage | 120V |
| Capacity | Tankless (On-Demand) |
| Material | Steel |
Defines warning symbols and keywords used in the document.
Provides essential safety instructions for gas leaks and combustion gases.
States compliance with European directives for the appliance.
Details the meaning of each character in the appliance's model code.
Lists all items included in the product packaging.
Provides a general overview of the heater's features and components.
Presents detailed physical dimensions and connection sizes of the appliance.
Illustrates and labels the main components of the appliance.
Shows the electrical wiring and connections of the appliance.
Lists the technical specifications, performance data, and operating parameters.
Explains how to operate the appliance for hot water delivery.
Explains the functions and indicators shown on the appliance's LCD screen.
Provides crucial pre-operation checks and technician guidance.
Details the procedure for powering the appliance on and off.
Guides users on how to adjust the desired hot water temperature.
Explains how the appliance operates when a hot tap is opened.
Instructions for pairing a remote control unit with the appliance.
How to use the remote control to adjust settings and operate the appliance.
Explains how to program and use preset temperature settings.
Describes the function that prevents accidental alteration of selected temperature.
Details the procedure to drain the appliance to prevent freezing.
Explains how to reset the appliance in case of an error code.
Explains the appliance's locked state and how it is resolved.
Provides essential considerations before starting the installation process.
Guidelines for choosing a suitable installation site based on regulations.
Specifies required clearances around the appliance for safety and maintenance.
Instructions for mounting the appliance's fixing bracket securely.
Step-by-step guide for the physical installation of the appliance.
Details how to connect the hot and cold water supply lines.
Explains the procedure and safety requirements for connecting the gas supply.
Instructions for installing flue and air intake components.
Specific steps for installing the air admission accessory.
Specific steps for installing the exhaust accessory.
Lists available accessories for flue and air systems with specifications.
Details specific accessories for twin pipe flue systems.
General guidelines for fitting the admission/exhaustion accessories.
Interprets symbols used in diagrams for accessory installation.
Details approved flue system types and their installation clearances.
Specific instructions for Exhaustion type A3, including outdoor installation.
Illustrates the configuration for Exhaustion type B23.
Illustrates the configuration for Exhaustion type C43.
Illustrates the configuration for Exhaustion type C53.
Illustrates the configuration for Exhaustion type C83.
Outlines the requirements for connecting the appliance to the mains supply.
Information regarding the provided power cord and plug.
Guides on how to locate and access the fuses in the control unit.
Specifies regulations regarding sealed parts and ignition conditions.
Details the procedure for checking gas pressure after installation.
Explains how to adjust CO2 levels for optimal combustion.
Describes various programmable settings and their factory defaults.
How to access diagnostic menus and interpret error codes.
Instructions to check the total operating hours of the appliance.
Guides on adjusting fan speed based on vent pipe configuration.
How to calculate the total equivalent length of exhaust/intake ducts.
Step-by-step process for setting the fan speed based on vent length.
Lists routine checks and maintenance procedures for the appliance.
Instructions for checking the fuses within the control unit.
Steps to follow after maintenance to safely restart the appliance.
A table detailing common display errors, their causes, and solutions.
