6 720 800 095 (2014/05) Therm 6000S
16 | Installation instructions
Fix the xing bracket to the wall using the screws and plugs
provided.
Fig. 22 Fix the xing bracket
5.5 Installation
Remove appliance from packaging.
Ensure that all indicated parts are included.
Remove the plastic caps from the gas and water
connections.
Loosen the two Philips head screws located on bottom rear
of cover (Fig. 23).
Fig. 23 Loosen the two screws
Fig. 24
Fix the appliance in a vertical position.
Lift front cover panel upward and remove.
CAUTION: Possibility of damage caused by
foreign bodies!
Purge all tubes to eliminate possible
foreign bodies.
6720608913-05.1AL
CAUTION:
Never rest the heater on the gas or water
connections.
To Next Page
Loading...
