Bosch Therm 6000 S - Fitting Instructions; Explanation of Symbols on Fitting Diagrams

6 720 800 095 (2014/05) Therm 6000S
20 | Admission / exhaustion accessories (accessory Ø 80/80 mm)
6.2 Fitting instructions
• The permissible maximum ue/air pipe length, Lmax, for the
various possible ue congurations is specied in the tables
starting on chapter 8.6.
• If the concentric ue/air pipe enters a chimney below
ground level, the appliance may register a fault and shut
down in cold weather due to ice formation. For that reason
such ue congurations should be avoided.
6.3 Explanation of Symbols on Fitting Diagrams
 Lightly grease seal on ue side with solvent-free
grease (e.g. Vaseline) (Fig. 29).
 Push ue kit fully home (in this
case: 50 mm
insertion depth) (Fig. 30).
 Drill two 3-mm diameter holes in the combus-
tion air pipe. Maximum drilling depth 8 mm. It is
essential that ue pipe is not damaged!
Fig. 31).
 Secure joint with the screws supplied (Fig. 32).
Fig. 29
Fig. 30
Fig. 31
Fig. 32
50
2x
Ø 3mm
2x
360°
6 720 604 873-17.1O
50
50
6 720 604 873-18.1O
Ø 3mm
Ø 3mm
2x
Ø 3mm
6 720 604 873-21.1O
2x
6 720 604 873-22.1O