6 720 800 095 (2014/05)Therm 6000S
Operating instructions | 11
Open water valve.
4.3 Connect and disconnect the appliance
Connect
To start the appliance press the On/O button.
Fig. 12
Disconnect
To shut down the appliance press the On/O button again.
4.4 Water temperature setting
To regulate the emitted water temperature:
Press the or until the desired value is
obtained.
Fig. 13
Once the desired temperature is set, open the hot water tap.
4.5 Operation
Turn ON the main swicth and the appliance is ready to work.
When a hot water tap is opened, main burner ignites and
LCD displays indication .
Fig. 14
Check for water leaks at all joints.
The temperature value indicated on the
LCD panel corresponds to the water
temperature at the appliance outlet.
These appliance has an electronically
controlled gas valve that modulates the
burner input in response to both varying hot
water ow rates and/or changes in any
incoming and outgoing water
temperatures.
LCD ashes until selected temperature is
reached.
6720608920-35.1AL
To Next Page
Loading...
