6 720 220 376
Subject to change without prior notice Revised 02-13
14 TSTBM3H2CPH6W-A Technician Setup Menu
Step 2.
Light key
DO NOT hold the light button on the
TSTBM3H2CPH6W-A for more than 10
seconds after Step 2 above has been
completed.
Holding the light button down will break the
communication link and the base module
button will need to be pressed again to
reestablish communication.
TECHNICIAN SETUP MENU
This thermostat has a technician setup menu for easy
installer conguration. To set up the thermostat for
your particular application:
1. Press MENU button
2. Press and hold TECHNICIAN SETUP button for 3
seconds. This 3 second delay is designed so that
homeowners do not accidentally access the
installer settings.
3. Congure the installer options as desired using
the table below. Use the [-] or [+] keys to change
settings and the NEXT STEP or PREV STEP key to
move from one option to another.
Only press DONE key when you want to exit
the Technician Setup options.
To Next Page
Loading...
Need help?
General
