To Next PageTo Next Page
Need help?Do you have a question about the Bosch Universalimpact 800 and is the answer not in the manual?
General| Chuck type | Keyless |
|---|---|
| Screwdriving | No |
| Product design | Pistol grip drill |
| Hammer drilling | Yes |
| Input power | 800 W |
| Cable length | 2.5 m |
| Output power | 560 W |
| Power source | AC |
| Torque (max) | 19 N⋅m |
| Idle speed (max) | 3000 RPM |
| Sound power level | 108 dB |
| Screw diameter (max) | 5 mm |
| Sound pressure level | 97 dB |
| Impact rate (high speed) | 45000 bpm |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 12 mm |
| Vibration level (metal drilling) | 8 m/s² |
| Drilling diameter in concrete (max) | 14 mm |
| Product color | Black, Green |
| Uncertainty K | 2 m/s² |
Weight and Dimensions| Weight | 1700 g |
|---|
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Wear ear protectors when impact drilling. Use the auxiliary handle(s).
Never operate at higher speed than the maximum speed rating of the drill bit.
Vibration total values and uncertainty K determined according to EN 62841-2-1.
