Bosch UniversalSaw 18V-100 - Page 17

English | 17
(11)
Saw blade
(12) Viewing window for CutControl
(13)
Guide roller
(14)
Shock protection guard
(15)
Saw blade receptacle
(16)
Worklight
(17)
Handle (insulated gripping surface)
(18)
Saw blade storage compartment
a)
(19)
Glide shoe
(20)
Anti-splinter guard
(21)
Guide for parallel guide
(22)
Dust extraction adapter
a)
(23)
Dust extraction hose
a)
(24)
Scale for mitre/bevel angles
(25)
Base plate screw
(26) 0° cut mark CutControl
(27) 45° cut mark CutControl
(28)
Locking screw for parallel guide
a)
(29)
Parallel guide with circle cutter
a)
(30)
Circle cutter centring tip
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Jigsaw UniversalSaw 18V-100
Article number
3603K111..
Stroke rate control ●
Pendulum action ●
Rated voltage V= 18
No-load stroke rate n₀ min
−1
0–2600
Stroke mm 20
Max. cutting depth
– in wood mm 100
– in aluminium mm 18
– in steel (unalloyed) mm 8
Max. cutting angle (left/right) ° 45
Weight according to
EPTA‑Procedure01:2014
A)
kg
2.0
(1.5Ah)to
2.3(6.0Ah)
Recommended ambient tem-
perature during charging
°C 0to+35
Permitted ambient temperature
during operation
B)
and during
storage
°C –20to+50
Recommended rechargeable
batteries
PBA 18V...W-.
Jigsaw UniversalSaw 18V-100
Recommended battery char-
gers
C)
AL 18...
A) Depends on battery in use
B) Limited performance at temperatures <0°C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/Vibration Information
Noise emission values determined according to
EN62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83dB(A); sound power level
94dB(A). Uncertainty K=5dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN62841‑2‑11:
Cutting boards with saw bladeT144D:
a
h,B
= 10m/s
2
, K = 1.5m/s
2
,
cutting sheet metal with saw blade T118A:
a
h,M
= 9m/s
2
, K = 1.5m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Battery Charging
u Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Bosch Power Tools 1 609 92A 5Y0 | (27.05.2021)