Positioning and connecting en
25
5 Positioning and
connecting
Positioning and connecting
Included with the appliance
Notes
■ Check the machine for transport
damage. Never use a damaged
machine. If you have any complaints,
contact the retailer from whom you
purchased the appliance, or our
after-sales service.
■ Moisture in the drum is due to the
final inspection.
In addition, a hose clamp (24 – 40 mm
diameter, available from specialist
retailers) is required to connect the
water drain hose to a siphon.
Useful tools
■ Spirit level for aligning
■ Wrench with:
– WAF13 for loosening the
transportation safety devices and
– WAF17 for aligning the appliance
feet
Installation
Note: Moisture in the drum is due to
the final inspection.
Secure installation
:Warning
Risk of injury!
■ The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine; wear
protective gloves.
■ If the washing machine is lifted by
protruding components (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■ If the hose and mains cables are not
laid properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
( Elbow for securing the water drain hose
0 Mains cable
8 Water supply hose on AquaStop/
AquaSecure models
@ Bag*:
■ Installation and operating instructions
■ After-sales service location directory*
■ Warranty*
■ Cover caps for openings after the
transportation safety devices have
been removed
■ Spanner*
H Water drain hose
P Water supply hose on standard models
* depending on the model
#
+
3
To Next Page
Loading...
