Laundry en
23
– Stains: Remove/pretreat stains
while they are fresh. Firstly, dab
with soapy water; do not rub.
Then wash the items of laundry
with the appropriate programme.
Stubborn or dried-in stains can
sometimes only be removed by
washing several times.
■ Symbols on the care labels
Note: The numbers in the symbols
indicate the maximum washing
temperature that may be used.
Starching
Note: Laundry must not be treated with
fabric softener.
Starching with liquid starch is possible
in programmes such as Rinse and
Cottons. Dose starch into compartment
M (if required, clean it beforehand) in
accordance with the manufacturer's
instructions.
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Soaking
1. Pour soaking agent/detergent into
compartment II in accordance with
the manufacturer's instructions.
2. Select the desired programme.
3. Press the Start Reload A button to
start the programme.
4. After approx. ten minutes, press the
Start Reload A button to pause the
programme.
5. After the desired soaking time, press
the Start Reload A button again to
continue or change the programme.
Notes
■ Load laundry of the same colour.
■ No additional detergent is required;
the soaking solution is used for
washing.
M Suitable for normal washing
process;
e.g. Cottons programme
N A gentle washing process is
required;
e.g. Easy-Care programme
O An especially gentle washing
process is required; e.g.
Delicate/Silk programme
W Suitable for washing by hand;
e.g. Wool programme
Ž Do not machine wash.
To Next Page
Loading...
