EasyManua.ls Logo

Bosch WAS20160UC/18 - Preparation; Machine Setup and Checks; Loading and Detergent Application; Setting and Adjusting Cycles

Bosch WAS20160UC/18
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
N nstall machine correct!y accordin9 to separate
installation instructions
Check machine
- Never start a damaged rnachine!
- Contact your customer service!
Plug machine into power
outlet
Z_ Only with dry hends!
Only touch the plug!
I
Open water tap
Dispenserforliquiddetergent(dependingon model),-> Page 8
Dispenser I1:Detergent for main wash, water softener, spot remover
Dispenser I_: Fabric softener, starch
Dispenser I: Do not
--"_ [.Z, r-L.? .;:f :i") , "..':.
Follow care instructions of the manufactured
According to the care instructions tag.
According to type, co!or, soiling and temperature.
Do not exceed maximum load -> Page 7.
Pay attention to important #_formation! ->Page 6! i :
Fill with large and small items of laundryl Close loading door. _i[
Do not catch pieces of laundry between the door il
and the rubber seat,
Measure detergent according m:
Size of wash load, amount of soiling, water hardness {contact your
local water supplier) and manufacturer's instructions.
For models without dispenser for liquid detergent.
Fitlthe liquid detergent in the appropriate measuring container and
place in the drum.
During operation: Be careful when opening the dispensing drawer! -
Thick fabdc softeners or stiffeners should be
thinned with water Prevents clogging
We recommend HE fHigh efficiency) detergents
i Auxiliary
functions
Spin : .........
speed Status displays Oycle selector : :
Setting and adjusting cycle
Auxiliary functions and
spin speed, refer to
Start/ individual settings
Pause -> Page 5
Signal
Reduced
ironing
Spin
o Max spin ,:: Wash
Heaw ;, Regut,_ispin : Rinse
duty :: Reduced spin : Spin
Rinse ' Gentbspin ; End
plus : No [ilta{ spin
Cycle selector for turning on
and off the machine and for
selecting the cycle Possible to
turn in both directions
Select
Start/Pause
All buttons are sensitive and
only need to be touched
briefl)4
Continued pressing of the
option button causes
automatic sequence of the
setting options

Related product manuals