To Next Page
P
paulwatsonJul 26, 2025
What to do if the pump filter is blocked in my Bosch Washing Machine Washer?
- CCraig MillerJul 26, 2025
If the pump filter in your Bosch Washer is blocked, clean it. Then, restart the program by pressing the ”Inicio“ button.
What to do if the pump filter is blocked in my Bosch Washing Machine Washer?
If the pump filter in your Bosch Washer is blocked, clean it. Then, restart the program by pressing the ”Inicio“ button.
What to do if the lid of my Bosch Washer is improperly closed?
If your Bosch Washer's lid isn't properly closed, make sure it is securely shut. Then, press the ”Inicio“ button to start the program.
Defines the intended use of the washing machine for household purposes with suitable fabrics and products.
Provides crucial safety advice for operating the washing machine, including child and pet safety.
Offers guidance on efficient and environmentally friendly operation, load sizes, and energy saving.
Details environmentally friendly disposal methods for packaging and the appliance itself, adhering to EU guidelines.
Identifies key external and internal parts of the washing machine, including control panel and hoses.
Highlights the securing bar for transport and proper lid closure for safety during operation.
Details the initial step of removing the washing machine from its transport base and wedge.
Explains how to remove the four screws from the appliance's rear using a screwdriver.
Guides on removing the securing device using a spanner and checking for plastic inserts.
Instructs to cover the holes with provided caps after screw removal for safety.
Details the process of removing additional securing devices with a quarter turn.
Explains how to remove the hose bracket and cover the holes with caps.
Provides instructions on how to move the washing machine, especially if fitted with castors.
Details how to connect the water inlet hose, specifying required water pressure.
Explains how to connect the drain hose, including height requirements and securing it properly.
Advises on checking hose conditions and replacing damaged hoses with original equipment.
Covers safe electrical connection, voltage correspondence, and ensuring proper earthing.
Stresses that the mains lead should only be replaced by authorized Customer Service.
Warns about the weight of the machine, risk of freezing hoses, and lifting precautions.
Guides on choosing a solid, even surface for installation and the importance of stability.
Explains how to use and adjust the machine's feet to ensure stability and levelness.
Explains symbols related to washing temperatures, fabric handling, and chlorine bleach use.
Interprets symbols for ironing temperatures, dry cleaning solvents, and mechanical action.
Explains symbols for drying levels, compatibility with washer-dryers, and general care instructions.
Recommends running an initial wash cycle without laundry to remove residual testing water.
Provides general advice on treating stains before washing, including testing and application methods.
Offers detailed instructions for removing various common stains like grass, ink, rust, grease, wine, and blood.
Warns about fire/explosion risks with certain stain removers and emphasizes following manufacturer instructions.
Advises on preparing laundry by checking pockets, closing zippers, and using nets for delicate items.
Specifies the maximum load limits for different fabric types (Cottons, Easy Care, Woollens, Delicates).
Provides average weights for various light and heavy laundry items to help estimate load size.
Details how to load the drum, mix item sizes, and avoid overloading for efficiency.
Explains how to open the washing machine lid and drum lids for loading.
Identifies the compartments for prewash, main wash, fabric softener, and bleaching agent.
Provides instructions on using the correct amount of detergent based on water hardness, load size, and soiling.
Identifies the main controls: programme selector, display panel, and start/pause pushbutton.
Explains the function of indicator lights, spin speed selector, and on/off switch.
Details controls for setting time, ending time, delayed start, and auxiliary function pushbuttons.
Advises users to familiarize themselves with controls and set the time before initial use or after a power failure.
Explains the visual representation of the programme sequence (Prewash, Washing, Rinsing, Spinning).
Describes displays for Ending Time, Delayed Start, and Remaining Time functions.
Details the display and setting of current time, ending time, and delayed start.
Mentions error codes and additional messages that may appear on the display panel.
Illustrates how the display shows status before the programme begins, including bars flashing.
Shows how the display indicates the set ending time for programmes.
Demonstrates the display format for programmes with a delayed start.
Explains how the display shows the progress of the programme sequence, with ending and remaining times.
Guides on setting the current time, which is essential for functions like Ending Time.
Provides step-by-step instructions for setting the hours and minutes using the control buttons.
Explains how time settings are stored, either by pressing a button or automatically after a delay.
Details how to activate or deactivate the permanent display of time when the appliance is switched off.
Explains how to set a specific time for the programme to end, with 15-minute increments.
Describes the countdown display for the delayed start function, showing hours and then minutes.
Guides on setting a delayed start for the programme, from 1 to 24 hours.
Explains how the display shows the remaining time for the programme in hours and minutes.
Details how to switch the display between Ending Time and Remaining Time.
Describes how to activate and deactivate the childproof lock to prevent accidental changes.
Provides general advice on setting programmes using brief pushbutton presses.
Explains how to switch between ENDING TIME, DELAYED START, and REMAINING TIME indicators.
Covers acknowledging programme start and how to cancel a programme by turning the selector to "Aus".
Details how to interrupt a programme using the Start/Pause button and how to restart it.
Guides on selecting the laundry type, temperature, or special programme via the programme selector.
Explains how to adjust spin speed or select Rinse Stop using pushbutton 7.
Describes how to select auxiliary functions by pressing specific pushbuttons.
Summarizes the steps for selecting programme, spin speed, auxiliary functions, and start options.
Details the control lights and display feedback for programme selection, spin speed, and start settings.
Explains how to pause the programme to add or remove laundry, noting lid unlock time.
Details how to stop a programme prematurely by setting the selector to "Aus".
Describes what happens at the end of a programme and the final steps before unplugging.
Lists and describes basic wash programmes like Cottons, Easy Care, Delicates, Woollens, and Silk.
Details special programmes such as Sportswear, Silk, and Quick Wash.
Lists additional programmes (Rinse, Spin) and auxiliary functions, noting their availability and impact on programme length.
Provides important notes regarding programme length variations and specific programme details.
Describes the Prewash, Intensive, and Easy Iron function buttons and their usage.
Explains the Rinse Plus auxiliary function for sensitive skin and allergy sufferers.
Details the procedure for using the soaking function, including detergent and timing.
Explains how to starch laundry using the machine, including programme and detergent.
Advises against dyeing or bleaching laundry within the washing machine.
Explains how to change programmes, temperature, spin speed, and auxiliary functions before starting.
Details how to change temperature, spin speed, and auxiliary functions during a running programme.
Covers changing programmes, time settings, and auxiliary functions during the selection of start or end times.
Explains how to select a new programme immediately after the previous one finishes without resetting.
Provides a chart showing optimal spin speeds for different laundry types and variable settings.
Details how to adjust spin speed or select Gentle Spin/Rinse Stop using pushbutton 7.
Explains the Rinse Stop function for delicate items, where laundry remains in the final rinse water.
Guides on how to empty the machine and spin dry the laundry after using Rinse Stop.
Explains the locking mechanism of the lid during operation and unlock conditions.
Describes the constant water level control that prevents overflows during operation.
Details safety features that reduce spin speed for imbalanced loads and protect against foaming.
Lists the standard programme and load used for testing according to EN 60 456 and IEC 60 456.
Warns about electrical shock, explosion hazards from solvents, and freezing risks during cleaning.
Provides instructions for cleaning the appliance exterior, control panel, and base using mild cleaning agents.
Recommends leaving the lid open, cleaning interior parts, and running a high-temperature wash periodically.
Details how to remove, clean, and reassemble the detergent dispenser for optimal function.
Stresses the importance of regular pump filter cleaning for maintaining machine performance.
Provides a detailed step-by-step guide to accessing and cleaning the pump filter and agitator.
Explains the 'd01' error code, its causes (tap closed, inlet hose issue), and remedial actions.
Describes the 'd02' indicator for a blocked pump filter and the necessary corrective action.
Covers 'd03' and 'd06' indicators related to drain hose blockages or drum issues.
Explains the 'd07' indicator for an improperly closed lid and how to resolve it.
Lists specific error indicators (e.g., d04, d05, d13) that necessitate professional service intervention.
Outlines initial steps to take when encountering these error codes, such as resetting the machine.
Lists common causes and solutions for the programme failing to start, including power and lid checks.
Addresses excessive vibration during spin cycles, often due to transport bolts or uneven flooring.
Explains why laundry might be insufficiently spun dry, suggesting checking programme selection or load distribution.
Covers problems related to water leaks or the machine not draining, including hose and filter checks.
Advises when to contact customer service, especially after trying self-help troubleshooting steps.
Specifies the product number (E-No.) and production number (FD-No.) needed when calling for service.
Directs users to the Bosch website for further product information and selection.
Outlines the conditions under which the Aqua-Stop system warranty applies, including compensation for water damage.
Clarifies that the warranty does not cover defective supply lines or fittings up to the tap connection.
States that appliances with Aqua-Stop can be left unattended without needing to turn off the tap for normal operation.
Presents a chart summarizing basic programmes, laundry types, temperatures, maximum loads, and programme lengths.
Displays a chart for special programmes like Sportswear, Silk, and Quick Wash with their parameters.
Lists additional programmes (Rinse, Spin) and auxiliary functions, noting their availability and impact on programme length.
General