20
In order to change an indicator, select another indicator using pushbutton and press the
”Start/Pause” pushbutton .
4
5
Changing the indicators
Delayed Start or
Remaining Time
ENDING TIME
DELAYED START
REMAINING TIME
Delayed Start
Remaining
Time
After setting and before
acknowledgement
Possible modificationsDisplayed functions
After
acknowledgement and
before the programme
start
During the
programme
Ending Time or
Remaining Time
Ending Time
Ending Time or Delayed
Start
Ending Time
Setting the programme
General
In general, only press the pushbuttons briefly; any other procedure is described in the
respective chapters, e.g. setting the time.
Pause
• Press the ”Start/Pause” pushbutton to interrupt the programme.
The ”Pause” bar and the programme sequence bars that are current will flash.
• Press the ”Start/Pause” pushbutton and restart the programme.
If an ENDING TIME or a DELAYED START has been selected, then the drum may be
opened at any time during the waiting time before the beginning of the programme
without interrupting the programme and having to restart.
(It may be 1 to 2 minutes before the lid unlocks.)
4
4
Acknowledgement
• A programme starts immediately after the ”Start/Pause” pushbutton is pressed .
• If a programme with a DELAYED START or ENDING TIME was selected, then the Start
pushbutton does not have to be pressed.
4
To cancel a programme
• Turn the programme selector to ”Aus”.
All preselected settings, Delayed Start or Childproof Lock are cancelled.
1
To Next Page
Loading...
